Installation of tile stickers and small posters

INSTALLATION OF TILES AND FLOOR STICKERS AND SMALL POSTERS

The same instructions apply to all other small stickers without shipping film .

Installing the wall stickers is relatively easy, but we still recommend that you follow our instructions to ensure that you stick your sticker on the wall correctly the first time.
The instructions below are valid for any smooth surface to which foil is applied - tiles, flooring, glass, furniture. You can see details in the Surfaces section.

• When you are calm during the gluing process, you will achieve the best result. Make sure that everything is in place before removing the paper backing as the adhesive layer is very strong and the foil becomes very lively.

Important! Clean the surface with a damp cloth so that it is free of dust and small particles. Let it dry.	1. Preparation Peel off 1 - 2 cm and fold the silicone paper back.
2. Adjustment • Align carefully with the top of the tile. • Check alignment. • Press and stick to the tile at the top edge with your finger.	3. Gluing Using the spatula, gradually stick the sticker to the tile. • If any bubbles remain or you want to move it slightly, you can peel off the sticker and re-stick it (do this only if unavoidable). • Avoid uneven surfaces, such as rounded edges of tiles.
4. Did you remove all the padding? • you can wipe away fingerprints. • if there are bubbles, pierce them with a pin and press.	Done! If more elements are included by design, repeat the same for each of them. You can now brag and show how a simple sticker completely transformed the kitchen and bathroom.

If you encounter any problems during the gluing process or just need some advice before you start, give us a call.
We will guide you through the individual steps and give you correct information to help you put your sticker on the wall.