Installation of large posters, banners and borders

INSTALLATION OF LARGE POSTER, STRIPS AND BORDERS

The same instructions apply to all other large stickers without shipping film .

Installing the wall stickers is relatively easy, but we still recommend that you follow our instructions to ensure that you stick your sticker on the wall correctly the first time.
The instructions below are valid for any smooth surface to which foil is applied - tiles, flooring, glass, furniture. You can see details in the Surfaces section.

• When you are calm during the gluing process, you will achieve the best result. Make sure that everything is in place before removing the paper backing as the adhesive layer is very strong and the foil becomes very lively.

• Spread the sticker out on a flat surface. Make sure the sticker is not wrinkled and run your hand over it to make sure there are no creases or visible bubbles.

We remind you!

Clean the surface with a damp cloth so that it is free of dust and small particles.
Let it dry.

1. Choose a suitable location for the sticker on the wall .
• Place it on the wall with the foil facing you.
• Align
• Attach at the four corners with tape.

2. Securely secure with tape across the middle (horizontally or vertically, depending on the shape of the sticker)

• Remove the tape from two of the corners.

3. Begin to carefully peel the sticker off the backing.
• Continue like this until you reach the fixing strip in the middle.

4. Cut the backing as close to the tape as possible.

 

 5. Start pressing the foil against the wall, continuously smoothing with the spatula.
• Make sure no bubbles remain.
• Start in the middle and press outward, moving slightly to the right.

• Wait a few minutes for the glue to set.
• Remove the fixing strip from the middle.

6. Repeat step 5 for the other half.
(horizontally or vertically, depending on the shape of the sticker)

Done!
• you can wipe away fingerprints.
• if there are bubbles, pierce them with a pin and press.
• if there are irregularities on the wall and the sticker is not firmly stuck, heat it with a hairdryer, press.

If for any reason you decide to remove your sticker from the wall later, see our instructions on the How to Remove Stickers from the Wall page.

If you encounter any problems during the gluing process or just need some advice before you start, give us a call.
We will guide you through the individual steps and give you correct information to help you put your sticker on the wall.